Ampt Analoger ADG-1 SE Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Pedał muzyczny Ampt Analoger ADG-1 SE. Ampt Analoger ADG-1 SE 12 stron.

LFO MODULE

The ADG-1 SE LFO module is the same

as our standard ADG-1. It contains a

center off switch so that you may "kill"

the modulation with the flick of a switch.

Please note: due to internal offsets, the

center off and the mod kill switch may

give slightly different "off" TIME settings.

Delay Insert

The ADG-1 SE contains a delay insert jack to the right of the controls. This

feature is traditionally only found in very advanced delays, including some

of Hawker's past designs. The insert may be used to successively change

the sound of the repeats. It is inserted post buckets and compandor, but pre

tone control and feedback such that it will successively change the delay

repeats only and not affect the dry signal.

Unlike some classic effects, the ADG-1 SE Delay insert

will affect the first repeat and every one after that. Try

inserting an EQ or Phaser into the chain for some great

tonal changes. An octave up or down effect is also a

great trick as each repeat will shift up or down octave as

they degrade. Lastly, you may wish to simply have a

gain control for some wild self-oscillating feedback

ability. You may wish to add more complex EQ or Tone

controls here so that it doesn't get carried away with self-oscillation.

To use this feature plug a TRS "insert" cable, such as a Hosa STP-201RR

Right Angle insert cable into the jack. The Ring contains the effect out and

the Tip is the loop return (Note: Rev A is Tip Out, Ring Return). Be sure

your device can handle the level output. Please note that any level change

from input to output will affect the feedback controls and output volume,

so you may need to have a gain or level stage control make up if your

device does not provide unity gain or work at stompbox levels.

<4>