AMPTech S Instrukcja instalacji - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe AMPTech S. AMPTech S 18 stron. Softclose automatic

○ For the next steps, the door sill trim must be removed. This is

secured with clamps and can be pushed out towards the inside

of the vehicle. In this way, access is gained to the cable hose that

connects the vehicle interior with the door. In the next steps, the

power cable is routed out of the door and the ground cable is

routed into the door through this hose.

○ Both the Y-connector (power) and the ground cable have a long

and a short End - For the following steps, make sure that the

correct end is used.

○

The short end of the yellow power cable (from the Y connector) is to be

connected to the yellow power cable of the clamping unit.

1. Subsequently, the long end of the power cable must also be routed

into the vehicle interior. To do this must:

2. The long end of the

cable

through

opening back to the

inside of the door body

(see picture)

routed

inside

body to the vehicle

interior

door's

conduit

Attention: It is recommended to use a retraction aid and cable

lubricant during this step in order not to damage the cables

already present in the cable conduit. The speaker opening

serves as access for this step.

from

the

door

via

the

cable