CardAccess ZGB20 Skrócona instrukcja obsługi i instalacji - Strona 8

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi i instalacji dla Bezprzewodowy punkt dostępowy CardAccess ZGB20. CardAccess ZGB20 12 stron. Security sensor bridge v2

Drukuj stronę
Sensor Name: An optional descriptive name may be entered here. This name is displayed on the property
o
page of the Bridge when data for this sensor is received.
Panic Button Contact State: shows the current state of the contact as "Opened" or "Closed."
o
Sensor Status: shows whether the sensor as "Online" or "Offline." This status is affected by the connection
o
state of the Sensor Bridge(s).
Last Sensor Event: shows the date and time of the last event received, as well as the contact status and low-
o
battery status.
Last Signal Level: shows the approximate signal level of the last received event. Use this level to aid in proper
o
positioning of sensors.
Supervisory Timeout: sets the number of supervisory periods which must be missed before the "Supervisory
o
Lost" event is triggered. Supervisory periods for these sensors are every 64 minutes.
Supervisory State: shows current state of the supervisory signal monitor.
o
Statistics: shows the number of events and RX success of the sensor.
o
•
Actions Page Help:
•
Identify Sensor: Click this button to allow the driver to automatically 'learn' the TxID of the sensor. After clicking
the button, activate the 'Panic' condition on the sensor by pressing and holding the panic button. When the sensor
has been successfully identified, the TxID will appear in the Sensor TxID field of the Driver Properties page.
•
Cancel Identify: Click this button to abort the sensor identify process. Note that clicking this button is not
necessary if you have successfully identified a sensor.
Smoke Detector Driver Details
•
Supported Devices:
GE Supervised Wireless Smoke Detector
o
-
Card Access Model Number: GSD10A
-
GE Model Number: TX-6010-01-1
NOTE: This driver MUST be used in conjunction with the Card
Access Security Sensor Bridge hardware and DriverWorks driver.
GE Wireless Sensors do NOT need to be associated in any way with
a specific Security Sensor Bridge in Composer.
•
Properties Page Help:
Sensor TxID: Enter the TxID printed on the Sensor Label.
o
The TxID is a 6 or 7-digit alphanumeric address.
Sensor Name: An optional descriptive name may be entered here. This name is displayed on the property
o
page of the Bridge when data for this sensor is received.
Alarm Contact State: shows the current state of the alarm as "Alarm" (meaning smoke is detected) or "No
o
Alarm" (meaning no smoke has been detected).
Sensor Status: shows whether the sensor as "Online" or "Offline." This status is affected by the connection
o
state of the Security Sensor Bridge(s).
Last Sensor Event: shows the date and time of the last event received, as well as the contact status and low-
o
battery status.
Last Signal Level: shows the approximate signal level of the last received event. Use this level to aid in proper
o
positioning of sensors.
_________________________________________________________________________________________________________________________
Card Access Security Sensor Bridge V2
Quick Start & Installation Guide
Page 8 of 12
Card Access, Inc.