Fomotech Alpha 500 Series Podręcznik - Strona 14

Przeglądaj online lub pobierz pdf Podręcznik dla Pilot zdalnego sterowania Fomotech Alpha 500 Series. Fomotech Alpha 500 Series 17 stron.

Drukuj stronę
10. TROUBLE SHOOTING
Should the operator find the equipment not operating normally, please check the chart below for
simple trouble shooting steps.
SYMPTOM
Transmitter does not
communicate to
receiver.
Transmitter does not
communicate to
receiver.
No power to the
receiver (AC power
indicator on the
receiver unit not lit).
Outputs do not
operate correctly.
Receiver System Status LED Display (please refer to Fig. 6 on page 7).
LED INDICATION
TYPE
1
Constant red light.
ON
2
OFF
3
Dim or no light.
ON
4
OFF
ON
5
OFF
ON
6.
OFF
REASON
Transmitter and the receiver are
not on the same RF channel (SQ
lamp not lit) or ID code.
Low or no transmitting power
from the transmitter unit.
Blown fuse or no input power
connection.
Receiver configuration is not set
properly or output wiring is
incorrect.
(Red)
EEPROM error, manufacture reprogramming
1.0 second
Incorrect ID code, please readjust accordingly.
1.0 second
Under-voltage, check the main power supply.
2.0 seconds
System error, manufacture reprogramming required.
0.1 second
0.1 second
System normal with transmitter pushbutton either in
2.0 seconds
0.1 second
System normal with transmitter pushbutton in
0.1second
Ensure the correct transmitter is in
use. The labels on the receiver and
the transmitter will identify the RF
channel and ID code in use.
Turn " o n" the transmitter and with
EMS in its elevated position. If
the status LED shows blinking red
light or no light at all, then turn the
power " o ff" and replace the two
alkaline AA batteries.
Ensure power input to the receiver
unit is correct. If power indicator
(AC) is still not lit, please check
the receiver for any burned fuse.
Please refer to section 6 and 7 to
ensure receiver is correctly wired
and configured for your
REASON
required.
neutral or in transmitter power " o ff" position.
non-neutral position (pressed).
14
SOLUTION
application.