DQ Vela Electric Instrukcja obsługi - Strona 17
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Grzałka DQ Vela Electric. DQ Vela Electric 18 stron.
Również dla DQ Vela Electric: Instalacja i mocowanie (4 strony), Instrukcje (2 strony)
Drukuj stronę
- To set the programmable time sequence for "Chrono" mode, press the [+] key until the words Pr8 or Pr9
(Programming) appear on the screen.
- Press the [Prog] key to enter the mode.
- You can now set a timeline for each day of the week.
- From day 1, select the desired sequence with the [+] and [-] keys to select, for each hour, between the "comfort"
temperature button (solid bar) [+] and the "Night temperature button "[-] (empty bar). Press [Prog] to confirm the
setting of the first day, repeat the same procedure for the remaining 6 days of the week.
OPEN WINDOWS DETECTION
The device detects the presence of an open window to limit energy consumption.
To activate this mode, activate the Stand-by mode, press the [Chrono] key for more than 3 seconds, scroll through
the modes with the [+] key and select FUNC with the [Prog] key. The window icon will flash in the top left of the
screen, using the [+] key, select ON / OFF, visible in the center of the screen, and confirm with [Prog].
The icon will be active while the thermostat is operating; If the open window is detected, the icon will flash and the
system will stop heating for a maximum of 30 minutes or until a temperature increase of at least 1.5 ° C.
ASC FUNCTION
This function optimizes the operating times of the appliance in order to limit consumption. By activating this mode,
the appliance will record the time necessary to bring a specific room to the set temperature, adjusting its operation
automatically; in this way, the thermostat could be activated after the set time if it is possible to reach the desired
temperature in less time than that foreseen by the set operating time intervals.
Activate the Stand-by mode, press the CHRONO key for more than 5 seconds, scroll through the modes with the
[+] key and select FUNC with the PROG key, press it until the icon appears at the top of the screen. Then select
ON with the [+] key and press PROG again to confirm. After a few seconds, the remote control automatically
returns to Stand-by mode.
ECO FUNCTION
This mode allows you to limit power consumption by lowering the set comfort temperature by 3 degrees. By
activating this mode, the appliance operates while maintaining a temperature corresponding to: SET
TEMPERATURE - 3 ° C.
Activate the Stand-by mode, press the CHRONO key for more than 5 seconds, scroll through the modes with the
[+] key, select FUNC with the PROG key and press it until the icon appears; Select ON with the [+] key and press
PROG again to confirm. After a few seconds, the remote control automatically returns to Stand-by mode.
KEYPAD LOCK
This function allows the user to lock the keypad to prevent accidental changes. All buttons on the remote control
are locked. To activate the lock function, press PROG for 5 seconds. To deactivate the function, repeat the
procedure.
IMPORTANT: THE REMOTE CONTROL AND THE APPLICATION ARE MUTUALLY EXCLUSIVE AND CANNOT
BE SIMULTANEOUSLY CONNECTED TO THE SAME THERMOSTAT.
MADE IN ITALY