Cardin S486 QZ2 Podręcznik programowania
Przeglądaj online lub pobierz pdf Podręcznik programowania dla Pilot zdalnego sterowania Cardin S486 QZ2. Cardin S486 QZ2 2 stron.
Również dla Cardin S486 QZ2: Podręcznik programowania (2 strony)
Drukuj stronę
CARDIN S449 QZ2 – S449 QZ4 – S449 QZ4M - S486 QZ2 - QZ4
Programming of your new remote control:
There are several methods for programming your new remote control.
From a remote control that has already been programmed:
1. Approach your motor so you are standing a few feet away from it.
2. With a sharply pointed object, press the hidden button from your already-programmed
remote control (diagram above, P1). The receiver emits a beep. Let the button go.
3. Press a button on your already-programmed remote control. The receiver emits a beep. Let
the button go.
4. Press the button you wish to program on your new remote control. The receiver emits 2
beeps. Let the button go.
5. Repeat this procedure for each button you wish to program.
6. Wait 10 seconds.
7. Your new remote control is programmed.
http://www.remotecontrol-express.com
Programming Manual
- TEL : +44 (0) 207 399 7782 - FAX : +44 (0) 207 927 3151