AMS CT424 DAB BT Instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik samochodowy AMS CT424 DAB BT. AMS CT424 DAB BT 14 stron.
Drukuj stronęSafety Information
Thank you for purchasing this product, please
read the manual carefully before operating,
and reserve it for future reference.
PRECAUTIONS
•
Only in a 24-volt DC negative-ground
electrical system.
•
Disconnect the vehicle's negative battery
terminal while mounting and connecting
the unit.
•
When replacing the fuse, be sure to use
one with an identical amperage rating.
U sing a fuse with a higher amperage
rating may cause serious damage to the
unit.
•
Make sure that pins or other foreign
objects do not get inside the unit, they
may cause malfunctions, or create safety
hazards such as electrical shock.
•
If you have parked the car for a long
time in hot or cold weather, wait until the
temperature in the car becomes normal
before operating the unit.
•
Keep the volume at a level at which you
can hear outside warning sounds (horns
sirens, etc.).
CAUTION
•
DO N O T o p e n c o v e r s a n d d o n o t
repair by yourself. Ask the dealer or an
experienced technician for help.
General
Power supply:
24V DC (18~32V)
Maximum power speaker:
Suitable speaker impedance:
Fuse spec:
Weight:
Dimensions (WxDxH):
188x118x58.5mm
FM Stereo Radio
Frequency range:
76 - 90 Mhz (japan mode )
Signal/noise ratio:
AUTO Step:
AM (MW) Radio
Frequency range:
Step:
LW Radio(EURO)
Frequency range:
AUTO Step:
EXT (AUX)
Jack Stereo 3.5mm ≥ 300mV auxiliary source
DIGITAL RADIO (DAB)
Frequency range:
174.928-239.200 MHz
1452.960-1490.624MHz
Step:
EN-1
Contents
Safety Information ..................... ..................1
Specifications ............................................... 1
Panel Controls ..............................................2
4X20W
Button Tips ....................................................3
4 ohm
Bluetooth Functions .................... .................7
10A
USB function Summarization .........................7
0.56kg
FCC ................................................11
Troubleshooting ............................................12
87.5 - 108 MHz
50dB
User Safety Code
100KHz
You need to enter password when power on,
the original password is 1234.
522-1620KHz
BEFORE OPERATION
9KHz
•
Do not raise the volume level too much,
as this will block outside sounds, making
driving dangerous.
153-280KHz
•
Stop the car before performing any
1KHz
complicated operation.
Note:
1. According to models with different wiring
connect
label.
2.
subject to change without notice due to
20KHz
improvements in technology.
.................................................8
...............................................10
to
harness
the
of the
content, please refer to the model
and the design are