AMS Controls MP328CL Podręcznik referencyjny - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik referencyjny dla Kontroler AMS Controls MP328CL. AMS Controls MP328CL 17 stron. Closed loop backgauge controller
Drukuj stronęFront Panel Components and Description
Setup Mode
AMS Controls
5/23/2012
The Model MP328CL front panel has three push button switches,
a 16 key keypad, and a two line 48 character liquid crystal
display.
The three push buttons provide the following functions:
•
CYCLE
This push button will open the gripper jaws and
will reset the sequence
•
RUN
Press to initiate an automatic move sequence
•
HALT
Press to manually stop the guide movement
The keys provide the following functions:
•
SETUP
Press to enter the setup mode.
mode is used to enter specific
about the Gripper.
•
∗
Press the asterisk key to exit the setup or
programming
STATUS key to display current position, etc.
•
PRG
Press to program a new set position.
the program mode, the new position will flash.
•
ENT
Press to store the values entered in the setup
and program modes.
•
CE
Press to clear an incorrect entry value before
the "ENT" key is pressed.
any errors reported by the controller.
Note:
The following descriptions include all possible
SETUP PARAMETERS and there are some parameters that
are not used for every application. Only use the ones that
apply for your particular machine.
modes.
Also known as the
Also used to clear
3
MP328CL Controller
The setup
parameters
While in
Gripper