AMS Controls XL200 Series Specyfikacje - Strona 8

Przeglądaj online lub pobierz pdf Specyfikacje dla Kontroler AMS Controls XL200 Series. AMS Controls XL200 Series 8 stron. Bar code scanner specifications
Również dla AMS Controls XL200 Series: Instrukcja wymiany akumulatora (5 strony), Instrukcja wymiany akumulatora (8 strony), Instrukcja wymiany akumulatora (8 strony)

controller and the scanner. If you cannot locate a NULL modem cable, contact AMS Controls to

purchase the "Console Mounting Kit" for your scanner.

 If you are using a Zebra LI3608 or Sick brand of scanner, you will need to make sure "pin 7 and

Pin 8" are not connected. This connection can be removed in several places, however, the

easiest place would be on the serial cable or the gender changer. See the pic below:

 Verify the Scanner and the XL200 Controller share the same "Ground". This can be verified by

using a multimeter.

 Go through the scanner setting again! Follow the instructions closely!

If none of the above items correct the problem call AMS!