Amsberg WR1800P Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przedłużacz Amsberg WR1800P. Amsberg WR1800P 6 stron. Mobile signal booster

Signal Booster Unit

BTS Port

Connect to outdoor antenna

Power / Step Switch

Turn on/off power

Digitally control gain 1dB step

Screen & Switch

Gain Counter

Mini Power - 24~60dB

Pro Power - 29~65dB

Power Status

MGC Step Switch

1 click increase 1dB gain

Indicator & Alarm

When the repeater receives a signal, it will show the signal strength through solid bars.

-50dB equal a full signal (five bars); -55dB equals four bars; -60dB equals three bars;

-65dB equal two bars and -70dB equals one bar.

If outside borders of the signal bars flash, the repeater is not receiving a sufficient signal.

Please check cable connections or adjust the external antenna.

If the repeater receives a signal better than -45dB, the entire signal scale will flash.

This can be caused by oscillation or low proximity to the signal source. Please extend the distance

between the repeater and outdoor antenna and/or reduce gain by adjusting the gain level by click

down arrows. The problem can also be caused by interference from other objects like satellite dish.

Remarks:

1) Default gain is set to maximum strength 60/65dB. Turn off or disconnect power source will reset gain counter.

2) The repeater will show the received signal strength, it may not resemble the signal outside.

SIGNAL BOOSTER GSM

PRO

Mobile Port

Connect to indoor antenna

Power

Connect to power supply

Screen & Indicator

Show repeater status

RSSI indicator / Alarm

Signal Bar & Alarm

Power Switch

Turn on/off repeater power

MGC Step Switch

1 click reduce 1dB gain