Dr. Clark VariGamma 2.0 Podręcznik - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik dla Produkty higieny osobistej Dr. Clark VariGamma 2.0. Dr. Clark VariGamma 2.0 15 stron.

Drukuj stronę

1. Using Program Drivers/Microsd Cards

The VariGamma 2.0

4.1.4 Using Program Drivers/microSD Cards

The microSD Card should be put in the slot with the the

PINS SHOWING UP

(Fig. 9 and 10). The microSD

Cards have frequencies programmed on them which are put together according to Dr. Clark's frequency

list for their specific purpose. This enables you to use the VariZapper 2.0 with very specific frequencies.

Fig. 9

Fig. 10

4.1.4.1 Uploading/downloading a program

The device automatically recognizes whether the microSD Card contains a frequency program or a

firmware update.

4.1.4.1.1 Upload program from Program Driver

Insert the microSD Card only when the Main Menu Panel is displayed (Fig. 11).

IMPORTANT:

Just after the Program Driver (PD) has been put into the slot, the PD will be uploaded automatically and

the message in Fig. 12 will appear, if the upload was successful. To select the uploaded PD press

You will be able to see and select all the PDs stored on the device (Fig. 13).

Fig. 11

Fig. 12

Fig. 13

4.1.4.1.2 Download program from VariGamma 2.0 to Program Driver

You can download a custom program that you have programmed with your VariGamma 2.0 onto a

Program Driver. This feature allows you to download the custom program to another VariBase (Zapper

or Gamma):

1) Go to Select a program.

2) Choose the program you want to download on an empty Program Driver

3) Select Send to Card

4) Confirm selection by choosing YES in the next step

5) Insert empty card into MiniSD Card slot and confirm by choosing

6) Wait for the confirmation

4.1.4.1.3 Download program from VariGamma 2.0 to APP

You can download a custom program that you have programmed with your VariGamma 2.0 to the

VariAPP. This feature allows you to also store all your custom programs on the VariAPP:

1) Go to Select a program.

2) Choose the program you want to download on o the VariAPP

3) Select Send to APP

4) Confirm selection with choosing YES in the next step

5) Follow instructions on the screen

6) Start APP and go into my PDs and choose the add icon

7) Hold Smartphone with NFC antenna over the wheel

6) Wait for the confirmation on the Smartphone then follow the instruction on the VariGamma 2.0

4.1.4.2 Updating firmware

The device automatically recognizes whether the microSD Card contains a frequency program or a

firmware update.

4.1.4.2.1 Update firmware with microSD Card

To update the firmware with a microSD Card:

First turn off your VariGamma 2.0

2) Insert the microSD card with the new firmware, then

3) turn on the device (press the Turnwheel for 5 seconds).

The software is now updated automatically. While the firmware loads, the Turnwheel is lit red. When the

upload is complete, the Turnwheel light turns green.

4) Remove the microSD card, before you restart your updated device.

4.1.4.2.1 Upload/update – Errors

If you try to upload a PD or update your VariGamma 2.0 with a microSD Card that has no information on

it, it will not be recognized and nothing will happen.