AMSEC BSL-0601A-W Instrukcja obsługi i instalacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Zamki AMSEC BSL-0601A-W. AMSEC BSL-0601A-W 20 stron. Biometric safe lock

American Security Products Co

AMSEC Biometric Safe Lock Operating Instructions

3. Enroll additional fingerprint and its bound code (Level 2)

Place an enrolled administrator's finger (ID No. 01 or 02) on the reader window and hold.

After the fingerprint and its bound code are verified successfully, the LCD screen shows

"Select Menu". Follow the same steps as to enroll the second administrator's fingerprint

and code to complete the enrollment.

Place an enrolled administrator's finger (ID No. 01 or 02) on the reader window and hold.

After the fingerprint and its bound code are verified successfully, then the LCD screen

shows "Select Menu", press "Menu/OK". Press "" or "" to select "Set/Cancel Time Delay".

8.6V

12/11:34

Set/Cancel

Time Delay

8.6V

12/11:34

Time Delay

00 min

Press "" or "" to set time delay (1 to 99 min). Press "Menu/OK"

8.6V

12/11:34

Time Window

01 min

Press "" or "" to set Time Window (0 to 15 min). Press "Menu/OK".

ATTENTION:

During Time Delay period, user can operate the entry pad, such as enrolling deleting etc.,

but the actuator will not be unlocked.

After the original time delay is changed successfully, the time delay for the first time

unlocking is the same as the original one. The new time delay will be effective afterwards.

When changing time delay, if the period is longer than the previous one, the new time

delay will be effective in the next unlocking. If the period is shorter than the previous one,

the new time delay will be effective after the next unlocking.

Place an enrolled fingerprint on the fingerprint reader window and hold until the LCD

shows "ID No. Verified". Enter its bound code. After the bound code is verified, the entry

pad will be unlocked after Time Delay ends.

02/10

Press "Menu/OK".

Part #4305278