Electrolux AF Series Podręcznik użytkownika - Strona 13
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Lodówka Electrolux AF Series. Electrolux AF Series 18 stron. Refrigeration
Również dla Electrolux AF Series: Podręcznik użytkownika (18 strony)
Drukuj stronę
Spillsafe™ glass shelves
Spillsafe™ glass shelves keep spills on the shelf. A shelf
retaining system minimises accidental movement of shelves
and they can be adjusted to various heights. Spillsafe™
glass shelves are not to be used as slide out shelves. To
remove the shelves, gently pull them forward until the shelf
comes clear of the shelf guides. To return the shelf, make
sure there is nothing behind that may obstruct movement.
Gently push the shelf into the cabinet and back into position.
Slide away glass shelf (where fitted)
This shelf can be used either as a full depth shelf or when
tall items need to be stored at the front of the appliance it
can be collapsed to half its original depth.
• To collapse the shelf:
1.
Pull the front half of the shelf forward.
2.
Then, from the underside, lift the front half of the
shelf by raising the rear edge over the recessed
hook detail.
Hook detail
3.
Pull the shelf forward and allow the rear to drop into
the side channels.
4.
Push the front shelf backwards (3,4) until it reaches
the rear stops.
• Repositioning:
The shelf can be repositioned within the appliance unit
by pulling the whole assembly out until the side panels
are free to pivot down, then pivoting the rear of the shelf
until the shelf is free from the liner runners. The shelf can
then be positioned in any of the runners – this is a very
useful feature if your appliance door happens to have
limited access.
electrolux refrigeration using your appliance 8
Deodoriser (where fitted)
Your appliance is fitted with a catalysing deodoriser to assist
with the removal of food odours inside your appliance.
Odours are removed by adsorption through the filter by the
normal operation of the appliance. Keeping food covered
and wrapping food with plastic wrap will also help to reduce
the odours inside your appliance.
Bottle twist holder operation (where fitted)
The bottle twist holder is used to prevent bottles from falling
over. The bottle twist holder consists of two parts, a sliding
front, and a rotating retainer ring.
The bottle twist holder can be used in two positions:
• Horizontal
When the bottle twist holder ring is horizontal, any item
that fits within the ring can simply be placed inside it.
• Vertical
When the bottle twist holder ring is vertical, it is possible
to simply slide the bottle twist holder along the bottle
retainer bar until it is pushed up against a bottle.
Note:
The bottle should be constrained on the other side by either
the end of the bin or other adjacent bottles.