Electrolux BM Series Podręcznik użytkownika - Strona 12
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Lodówka Electrolux BM Series. Electrolux BM Series 18 stron. Refrigeration
Również dla Electrolux BM Series: Podręcznik użytkownika (18 strony)
Drukuj stronę
7 using your appliance electrolux refrigeration
caution
Never store solvents or flammable materials like nail polish
remover or lighter fluid inside your refrigerator. They will
affect the life of the plastic components and may taint
stored food.
Door storage bins
The top mount models, bottom mount freezer model and all
refrigerator models are fitted with door storage bins. These
bins adjust to meet different storage needs. All the door
bins are completely removable for cleaning. If you want to
remove or adjust a bin, lift it over the support lugs on the
inner door panel. To replace, push the bin down over the
support lugs to lock it in place.
Dairy compartment
Use the dairy compartment to store foods like butter,
margarine and cheeses. The compartment is slightly
warmer than the rest of the refrigerator compartment, while
the lid provides protection against odours.
Chiller bin (where fitted)
Use the chiller bin to store foods like smallgoods, fresh
or cooked meat and cheese, or as an additional crisper.
The bin will prevent strong food odours from creeping into
the rest of the refrigerator. To remove the chiller bin, pull it
forward, then lift it up and pull it further forward.
Modula bottle caddy
The Modula bottle caddy is made of anodised aluminium.
They are used to store various types of bottles like wine or
beer. Bottles should be stored with the bottom end towards
the back of the refrigerator. The fridge arrives with three
combined caddies, but they can be separated if desired.
Freezer drawers
Freezer drawers are fitted to bottom mount models and
single door all freezer models. The drawers are mounted
on telescopic extension slides, to enable full access to the
content in the drawer. Clear plastic fronts provide easy
visibility of foods.
• To remove the drawer for cleaning,
1.
Empty food from the drawer.
2.
Remove the drawer by pulling it forward and lifting
the front to unhook it from the slides. Once you
have removed the drawer, ensure the slides are
pushed back so they are fully closed.
• To remove the drawer for cleaning,
1.
Empty food from the drawer.
2.
Remove the drawer by pulling it forward and lifting
the front to unhook it from the slides. Once you
have removed the drawer, ensure the slides are
pushed back so they are fully closed.
warning
Never close the door while the telescopic slides are
extended. This may damage the slide and/or refrigerator or
cause the slide to become disengaged from the refrigerator.
• To replace the drawer
1.
With the telescopic slides pushed in all the way.
2.
Slide the drawer into place over the slides and push
the bin in until it stops. The bin will not be closed all
the way.
3.
Open the bin to access the finger tabs at the ends
of the telescopic slides, on each side of the bin.
Using your thumb and forefinger, lift the bin over the
end of the slide and clip in place. If the drawer is not
fully engaged on the slide, it's possible the drawer
won't stay on the slide if fully extended.
The end of slide must
be clipped into place
4. Fully close the bin.
When replacing the drawers after cleaning, we recommend
fitting the lower drawer first.
Freezer baskets (built-in freezer only)
Freezer baskets and a freezer shelf are fitted to built-in
freezers. Wire baskets are used to provide easy visibility of
the contents. Both the baskets and the shelf pull out for
easy access and have a stop to prevent the basket and
shelf being pulled out too far.
To remove the basket or shelf, pull it out until it hits the stop
then lift the front to unhook the stop while continuing to pull
forward.