Electrolux Built-In Dishwasher Instrukcja obsługi - Strona 6

Electronic programmer

The oven will work only if the time of day has

been set. Moreover, the oven can also be operated

without any programme.

When the power supply is switched on, or after a power

failure, the "Time of day" pilot lamp

display.

To set the correct time of day:

1. press button " " or " ".

2. After the setting is carried out, wait for 5 seconds: the

"Time of day" pilot lamp

will show the set time. The appliance is ready for use.

To reset the correct time of day:

1. press button

function. The relevant pilot lamp will start flashing. Then

proceed as described above.

The time of day may be reset only if no automatic

function (cook duration

has been set.

"Cooking Duration" function

Thanks to this function, the oven will automatically switch

off at the end of a programmed cooking duration time.

Place food in the oven, select a cooking function and

adjust the cooking temperature. Press button

to select the "Cooking Duration" function. The relevant pilot

will go out and the display

repeatedly to select the "Time of day"

or end of cooking

1. Push button for selecting a function

2. Decreasing control button " "

3. Increasing control button " "

4. Display

5. "Cooking Duration" pilot lamp

6. "End of cooking" pilot lamp

7. "Minute minder" pilot lamp

8. "Time of day" pilot lamp

will flash on the

)

repeatedly