AirSource TempAir Instrukcja instalacji, obsługi i konserwacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji, obsługi i konserwacji dla Centrale wentylacyjne AirSource TempAir. AirSource TempAir 20 stron. Air handling units, airsource heatpumps
Drukuj stronę
HEALTH & SAFETY
Important information
Important information
This symbol is provided to highlight important additional information.
Caution
This symbol identifies potential situations which could lead to the damage of
This symbol identifies potential situations which could lead to the damage of
This symbol identifies potential situations which could lead to the damage of
equipment.
Danger
This symbol indicates situations which present hazardous conditions, which without
This symbol indicates situations which present hazardous conditions, which without
This symbol indicates situations which present hazardous conditions, which without
applying strict health and safety procedures can result in serious personal injury or
ng strict health and safety procedures can result in serious personal injury or
ng strict health and safety procedures can result in serious personal injury or
even death.
General
This section deals with the hazards that could be encountered when any work is
This section deals with the hazards that could be encountered when any work is
This section deals with the hazards that could be encountered when any work is
carried out on the equipment for which this manual is written. Therefore the
carried out on the equipment for which this manual is written. Therefore the
carried out on the equipment for which this manual is written. Therefore the
following points should be observed to avoid any injuries or health hazards.
following points should be observed to avoid any injuries or health hazards.
following points should be observed to avoid any injuries or health hazards.
The installation of the unit shall be checked to ensure that:
The installation of the unit shall be checked to ensure that:
A suitable electrical supply is connected.
A suitable electrical supply is connected.
Prior to entry to any section please ensure that the electrical supply
Prior to entry to any section please ensure that the electrical supply is
Prior to entry to any section please ensure that the electrical supply
isolated either at the control panel or at the incoming mains. Please note
isolated either at the control panel or at the incoming mains. Please note
isolated either at the control panel or at the incoming mains. Please note
that if the control panel isolator is switched off the incoming side of the
that if the control panel isolator is switched off the incoming side of the
that if the control panel isolator is switched off the incoming side of the
electric supply will remain live. DO NOT enter the unit while the fans are
electric supply will remain live. DO NOT enter the unit while the fans are
electric supply will remain live. DO NOT enter the unit while the fans are
running. After isolating t
running. After isolating the electrical supply wait 2 minutes for the fans
to stop prior to removing fan covers.
to stop prior to removing fan covers.
It is suitable for the atmosphere or the environment in which it is to be
It is suitable for the atmosphere or the environment in which it is to be
It is suitable for the atmosphere or the environment in which it is to be
used. Coastal applications should be notified to the manufacturer prior
used. Coastal applications should be notified to the manufacturer prior
used. Coastal applications should be notified to the manufacturer prior
to order.
It is suitable for the working media, temperature and pressure for which
it is to be used.
Electrical equipment is earthed to comply with I.E.E. regulations and
Electrical equipment is earthed to comply with I.E.E. regulations and
Electrical equipment is earthed to comply with I.E.E. regulations and
local by-laws.
The procedure for removing and replacing filter media are fully carried
The procedure for removing and replacing filter media are fully carried
The procedure for removing and replacing filter media are fully carried
out as set out in th
out as set out in this manual.
Cautionary Notes
No part of the unit shall be dismantled until a careful study has been made of this
No part of the unit shall be dismantled until a careful study has been made of this
No part of the unit shall be dismantled until a careful study has been made of this
manual.
This manual deals in detail with erection, commissioning, and servicing, and shall be
This manual deals in detail with erection, commissioning, and servicing, and shall be
This manual deals in detail with erection, commissioning, and servicing, and shall be
strictly adhered to. Wherever any maintenance
strictly adhered to. Wherever any maintenance or work is done within the unit, the
interior shall be left clean and all access panels and guards shall be correctly
interior shall be left clean and all access panels and guards shall be correctly
interior shall be left clean and all access panels and guards shall be correctly
fastened.
Water Treatment
Check for any treatment that is required to the water supply for prevention of
Check for any treatment that is required to the water supply for prevention of
Check for any treatment that is required to the water supply for prevention of
corrosion and scaling of eq
be taken can be obtained from the relevant Water Supply Authority, particulars of
be taken can be obtained from the relevant Water Supply Authority, particulars of
be taken can be obtained from the relevant Water Supply Authority, particulars of
which can be found in the Waters Engineers Handbook yearly edition.
which can be found in the Waters Engineers Handbook yearly edition.
3
Installation, Operation & Maintenance M
Installation, Operation & Maintenance Manual
fgfgffhfgfggbffgfV11:0212212121
SAFETY
is provided to highlight important additional information.
he electrical supply wait 2 minutes for the fans
e for the working media, temperature and pressure for which
e for the working media, temperature and pressure for which
scaling of equipment. Information regarding the necessary action to
uipment. Information regarding the necessary action to
or work is done within the unit, the