Bosch ASCENTA SHX6AP Instrukcja obsługi i konserwacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Zmywarka Bosch ASCENTA SHX6AP. Bosch ASCENTA SHX6AP 26 stron. Bosch ascenta models dishwashers use & care manual
Również dla Bosch ASCENTA SHX6AP: Instrukcja obsługi i konserwacji (21 strony), Instrukcja obsługi i konserwacji (21 strony)

Bosch ASCENTA SHX6AP Instrukcja obsługi i konserwacji
5

Rack Accessories

* Extra Tall Item Sprinkler (select models)
If an item is too tall to be placed into the bottom rack even
with the top rack in the raised position, remove the empty
top rack by pulling it out of the dishwasher until it stops.
Pull the front of the rack upward and outward until the
rollers are completely free of the roller guides.
Set the top rack aside. Push the roller guides back into the
dishwasher. Insert the Extra Tall Item Sprinkler into the top
rack spray outlet and turn the sprinkler clockwise to lock
it into position. Load the dishwasher lower rack as shown
below. It can accommodate items up to 22" tall.
To avoid dishwasher damage, do not reinstall the top rack
without removing the extra tall item sprinkler.
NOTE: Keep the vent on the tub's left side clear by placing tall
items such as plastic cutting boards and tall baking sheets
on the bottom rack's right side,or center.
To remove the sprinkler and return the dishwasher to its
normal condition:
Turn the sprinkler counterclockwise and remove it.
10
Do not block vent
NOTICE
Retrieve the top rack
Tilt the rack upwards and position the top rack rollers
onto the roller guides.
Continue pushing the top rack until the rollers are on
the guide.
Push the rack into the dishwasher all the way.
Flip Tines
The racks on select models consist of tines that you can
fold down or raise depending on what you have to load
in the rack.
To fold down:
Grasp the tine.
Release from notch.
Push downwards.
Manual Rack Height Adjustment
Remove the empty rack by pulling it out of the dish-
washer to the point that it can be lifted upward, as shown
above. Pull the rack outward and up until the rollers are
completely free of the roller guides.