1byone O00QL-0045 Podręcznik użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Maszyna do mgły 1byone O00QL-0045. 1byone O00QL-0045 5 stron. 400 watt low lying fog machine

Drukuj stronę

Names for Parts

(A) Spray Nozzle

(B) Handle

(D) Product Cover

(E) Ice Reservoir Knob

(F) Wired Control Cable Interface

(G) Fuse Knob

(H) On/Off Switch

(I) Water Drainage Tube

How to Use?

Before using the fog machine, you have to prepare Fog Liquid (not included). Then operate according to following

sequence.

1. Remove all the packages.

2. Carefully put this product onto a clean, flat and solid surface, close to the power socket.

3. Unscrew the lid on the tank by turning counterclockwise and pour the Fog Liquid inside. Do not spill Fog Liquid onto

the product body. Do not overfill. If liquid gets into the Fog Machine, leave it to be dry completely before plugging in.

Do not cut, pinch, or break the tube connected through the tank lid. Screw the lid clockwise to the tank tightly.

Always make sure there is enough Fog Liquid in the tank before using the Fog Machine.

4. Unscrew and remove the Ice Reservoir Knob. Lift the front cover by placing fingers underneath the cover and

pushing up to expose the ice reservoir. Put ice on top of metal shelf; allow space for cover to close. Set the Knob back

to secure.

5. Insert the Water Drainage Tube (located at the back of the fog Machine) into the Plastic Water Bag, which is to collect

the water from the melting ice.

6. Connect the wired control cable to the Interface at the back of the Fog Machine.

7. Connect the product with proper power socket. Set the On/Off Switch to on position at the back of the machine.

8. Warm up time is approximately 4 – 5 minutes. When fully heated, the Wired Control Indication Light will turn on and

the Fog Machine will be ready to produce and spray fog.

9. Set the On/Off Switch to on position on the Wired Control Box, nozzle will start spraying fog.

10. The nozzle will stop spraying fog if you set the On/Off Switch to off position on the Wired Control Box.

11. Turn off the product before refilling fog liquid to the fog machine.

12. Unplug the product when not in use.

13. To refill the tank; turn off the unit, unplug and follow the directions in Step 3.

(J) On/Off Switch

(K) Wired Control Indication Light

(L) Wired Control Box

(M) Wired Control Cable