Bosch Integra SHX46L12UC Instrukcja obsługi i konserwacji - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Zmywarka Bosch Integra SHX46L12UC. Bosch Integra SHX46L12UC 44 stron. Dishwasher use and care manual for model : shx46l
Drukuj stronę
If your dishwasher will be unused for
an extended period of time in a location
that experiences freezing temperatures
(e.g., in a holiday home or through a
vacation period), you must drain all the
water from the dishwasher's interior.
a ) Turn off the water supply.
b ) Disconnect the drain hose, and
allow your dishwasher to completely
drain into a bucket or other appropriate
receptacle.
1. Wiping Up Spills and Splash-out
Water may occasionally splash out of
your Bosch dishwasher, especially if you
interrupt a cycle or open the dishwasher
door during a cycle. To avoid floor
damage and possible mold growth, do
not allow wet areas to remain around or
under the dishwasher.
3. Check/Clean the Stainless Steel
Inner Door and Tub
a ) Clean the outer edges of the inside
door panel regularly to remove debris
that might collect there from normal
loading.
b ) If spots begin to appear on the
stainless steel tub or inner door, make
sure the rinse agent reservoir is full.
4. Check/Clean the Spray Arm
Nozzles
Occasionally check the spray arms to
ensure that the spray nozzles are
unobstructed. You must remove the
spray arms to check them for obstruction.
- To remove the top spray arm:
a ) Remove the empty top rack from the
dishwasher.
b ) Turn the rack upside-down. The top
spray arm is held in position by a locking
nut as shown in Figure 21A. Turn the
locking nut counterclockwise 1/8 turn and
remove it, as shown in Figure 21B to
release the spray arm.
Figure 21
A
B
CARE AND MAINTENANCE
c ) Remove the spray arm as shown in
Figure 22.
Figure 22
d ) Look for obstruction in the spray
nozzles.
e ) If the spray nozzles need cleaning,
flush them under running water.
- To reinstall the top spray arm:
f ) Return the top spray arm to its
installed position.
g ) Return the locking nut to its
installed position and turn it 1/8 turn
clockwise.
h ) Return the top rack to the top rack
roller guides.
- To remove the bottom spray arm:
i ) Remove the empty bottom rack from
the dishwasher tub.
j ) Grasp and lift the bottom spray arm
as shown in Figure 23.
Figure 23
k ) Look for obstruction in the spray
nozzles.
l ) If the spray nozzles need cleaning,
flush them under running water.
- To reinstall the bottom spray arm:
m ) Return the bottom spray arm to its
installed position and press it so that it
snaps into place.
n ) Return the bottom rack to its
installed position.
5. Check/Clean the Filter System
Your Bosch dishwashers has a filter
system that is made up of a Large Object
Trap/Cylinder Filter assembly, a Fine
Filter, and a Micro Filter. The filter system
is located on the dishwasher floor and is
easily accessible.
During normal use the filter system is
self-cleaning, but you should
occasionally inspect it for foreign objects
and clean it when necessary.
- To Remove the Large Object
Trap/Cylinder Filter Assembly:
a ) Remove the bottom rack.
b ) Grasp the assembly as shown in
Figure 24, and turn it counterclockwise
1/4 turn.
Figure 24
c ) Lift out the assembly as shown in
Figure 25.
Figure 25
C A U T I O N
INJURY HAZARD:
The large object
trap could contain sharp objects. Do
not reach into the large object trap
with your fingers.
d ) Carefully examine the assembly. If
you find debris in the Large Object
Trap, turn it upside-down and gently tap
it on a surface such as a countertop to
dislodge and remove the debris. Flush
the Cylinder Filter clean by holding it
under running water.
- To Remove the Fine Filter and
the Micro Filter:
e ) Lift the Fine Filter from the
dishwasher floor as shown in Figure
26 and flush it clean by holding it under
running water.
Figure 26
9