Bosch SB Series Instrukcja obsługi - Strona 25

Drukuj stronę

3. To continue the programme, switch

on the ON/OFF switch ( again.

4. Close the door.

T erminating the programme

T e r m i n a t i n g t h e p r o g r a m m e

(Reset)

1. Open the door.

2. Press START button )" for

approx. 3 sec.

The numerical display 8 indicates

3. Close the door.

The programme sequence lasts

approx. 1 min. On the digital display

8 is indicated :

4. Open the door.

5. Switch off ON/OFF switch (.

6. Close the door.

Changing the programme

When the START button )" has been

pressed, the programme cannot be

changed.

The only way a programme can be

changed is by Cancel programme

(Reset).

Intensive drying

The final rinse uses a higher

temperature which improves the drying

result. The running time may increase

slightly. (Caution if utensils are delicate!)

1. Open the door.

2. Switch on ON/OFF switch (.

3. Hold down programme button #

and press START button )" until

: .... is indicated on the digital

display.

Cleaning and maintenance

4. Release both buttons.

The LED for button # flashes and

the digital display 8 displays the

factory setting :

5. Press programme button # until

the factory set value :

indicated on the digital display 8.

To change the setting,

1. Press the button 3 to switch the

Intensive drying on :

2. Press START button )".

The set value is saved.

3. Close the door.

Cleaning and

maintenance

n g

C l e a n i

A regular inspection and maintenance

of your machine will help to prevent

faults. This saves time and prevents

problems.

Overall condition

of the machine

Check spray arm for grease

and limescale deposits.

If you find such deposits:

Fill detergent dispenser with

detergent. Start the appliance without

utensils in the programme with

the highest rinsing temperature.

Clean the appliance with detergents/

appliance cleaners which

are particularly suitable for use with

dishwashers.

or off :

a n d

n a n c e

m a i n t e