Bosch SGE63E15UC Instrukcja instalacji - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Zmywarka Bosch SGE63E15UC. Bosch SGE63E15UC 38 stron. 24" recessed handle special application
Również dla Bosch SGE63E15UC: Uzupełnienie (2 strony), Instrukcja instalacji (40 strony), Instrukcja obsługi (40 strony), Instrukcja obsługi (40 strony), Instrukcja obsługi (44 strony), Broszura i specyfikacje (3 strony), Instrukcja obsługi (40 strony)

Attaching the Toe Panel

Your dishwasher comes with either a two-piece or three-

piece toe panel (model dependent) to allow height adjust-

ment.

1. Position the slotted rear toe panel on the dishwasher

first. Allow it to rest on the floor.

2. Position the mating front toe panel on top of the rear toe

panel allowing the angled edge to rest on the mating

edge of the dishwasher.

3. Drive the two black screws (B) through the holes in the

toe panel to secure. Use the supplied screws to avoid

damaging the dishwasher. See Figure 26.

4. For models with a three-piece toe panel, the rubber

apron removed earlier may now be attached and should

remain behind the outermost toe panel.

5. For models with outer toe panel (3rd piece - L) slide

the brackets (K) provided, into the slots of the toe panel

you just attached.

6. Once you determine the correct position for the brack-

ets, remove the bracket and bend the metal tab. See

Figure 27. This ensures that the toe panel will not

slide in further than you need.

7. Re-insert the brackets.

8. Attach the outer toe panel (L) onto the brackets and drive

the screws provided in place to secure the toe panel en-

suring that the rubber apron is completely hidden behind

the outer toe panel.

Figure 26

Figure 27