Bosch SGI 43E35 Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zmywarka Bosch SGI 43E35. Bosch SGI 43E35 30 stron.
Drukuj stronęWater softener
In order to rinse dishes and glasses
satisfactorily, the dishwasher requires soft
water, i.e. containing little or no lime,
otherwise water stains will be left behind
on crockery and glasses, etc.
If the tap water exceeds a certain level of
hardness, it must be softened, i.e.
decalcified, so that it can be used in the
dishwasher.
This is achieved by adding a special salt
to the water softener inside the
dishwasher.
The water softener, that is the required
amount of salt, is set up according to how
hard the tap water is.
Setting up the water softener
Determine the level of hardness of your
tap water. Your local water company or
service agent can help you with this.
Identify setting from the following water
hardness table.
Close the door
Rotate the programme selector
from the 12 o'clock position by one
notch to the left.
Water hardness table
_dh
_fH
0–6
0–11
7–16
12–29
17–21
30–37
22–35
38–62
Downloaded from DishWasher-Manual.com Manuals
3
_Clarke mmol/l
0–8
0–1,1
9–20
1,2–2,9
21–26
3,0–3,7
27–44
3,8–6,2
Switch on main switch
down for at least 3 sec.
The display
9
above the symbols
(hardness value has been set to 2
at the factory).
To change the setting: Rotate the
programme selector
You can select a set value between
0 and 3 according to the hardness
of your water.
If the lamps
,
the maximum set hardness value
has been reached. If the set hardness
value is now increased again, the
lamps go out and the set hardness
value is set to 0 (no lamp lights up).
Switch off the main switch
The chosen setting has now been
stored.
0
1
2
3
en
and hold
1
flashes and the lamps
and
light up.
.
3
and
light up,
.
1
7