Bosch SGV 57T23 Instrukcja obsługi - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zmywarka Bosch SGV 57T23. Bosch SGV 57T23 33 stron.

Switching the salt refill

indicator / water softening

system off and on

Hold down the programme button B

and switch on the main switch

then release the buttons.

The illuminated button B and the

factory-set value

display flash.

To change the setting: press the

programme button B .

Each time the button is pressed, the set

value increases by one; when the value

is reached, the display jumps back

(the salt refill indicator / water

softening system has been switched

off).

Switch off the main switch

The set value is stored within the

device.

Approx. 4 litres of water are required to

regenerate the water softening system.

As a result, the water consumption per

rinse cycle increases by 0 to maximum

4 litres depending on the water hardness

setting.

Note

If you use the detergent and rinse aid

separately or switch from combined

detergents to standard cleaning products,

ensure that the rinse aid refill indicator has

been switched on and the water softening

system has been set to the correct water

hardness.

Downloaded from DishWasher-Manual.com Manuals

on the digital