Drainvac COMMERCIAL 2AC9932-M Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odkurzacz Drainvac COMMERCIAL 2AC9932-M. Drainvac COMMERCIAL 2AC9932-M 15 stron.
Również dla Drainvac COMMERCIAL 2AC9932-M: Instrukcja obsługi (15 strony)
Drukuj stronę
UNIT INSTALLATION
1) MOUNTING THE UNIT ON THE WALL
• Undo the fastener securing the wall bracket and base at the
back of the unit with cutting pliers.
If the wall is covered with gypsum board,
we recommend installing a wooden panel
screwed to the wall studs beforehand for
more stability. Then, screw the bracket to
the wall with the five (5) screws supplied
with the unit.
For a installation directly on a wall stud, screw three (3) screws in the
middle area only.
12
Cut the fastener
Gypsum
Board
Wooden
panel
Wall Stud
Suggested distance
from the floor:
50" (125 cm)
• Lift the head to slide its support onto the wall bracket.
2) CONNECTING THE
DUST INLET
• Connect the dust inlet onto the unit
securing it with a collar (do not glue).
UNIT INSTALLATION
13