Drainvac 2AC9932-CT Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Centralne systemy próżniowe Drainvac 2AC9932-CT. Drainvac 2AC9932-CT 15 stron.
Również dla Drainvac 2AC9932-CT: Instrukcja obsługi (15 strony), Instrukcja obsługi (15 strony)

Drukuj stronę

UNIT INSTALLATION

1) MOUNTING THE UNIT ON THE WALL

• Undo the fastener securing the wall bracket and base at the

back of the unit with cutting pliers.

If the wall is covered with gypsum board,

we recommend installing a wooden panel

screwed to the wall studs beforehand for

more stability. Then, screw the bracket to

the wall with the five (5) screws supplied

with the unit.

For a installation directly on a wall stud, screw three (3) screws in the

middle area only.

Cut the fastener

Gypsum

Board

Wooden

panel

Wall Stud

Suggested distance

from the floor:

50" (125 cm)

• Lift the head to slide its support onto the wall bracket.

2) CONNECTING THE

DUST INLET

• Connect the dust inlet onto the unit

securing it with a collar (do not glue).

UNIT INSTALLATION