Drainvac Automatik Series Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Centralne systemy próżniowe Drainvac Automatik Series. Drainvac Automatik Series 18 stron.

TITRE
TITRE
UNIT DESCRIPTION
UNIT DESCRIPTION
TITRE
Audioprotek muffler
24V plug
Power cord
Va cu um pi pe
Audioprotek
muffler
Dust entry
24V plug
Power cord
Rubber hand
in / 7 .6 c
e (D ia : 3
is c h a r g
W a t e r d
12
nt
To ou ts id e ve
Audioprotek muffler
2 motor booster head
To ou ts id e ve nt
su p p ly
C o ld w at e r
Audioprotek muffler
2 motor unit
Porthole
O-ring
Porthole window
m )
DV2A32 / DF2A32
INSTALLING THE PIPING SYSTEM
INSTALLING THE PIPING SYSTEM
The following pages illustrate piping diagrams, typical installations and the parts that we recommend
for the optimum performance of your central vacuum system.
GENERAL INFORMATION
• An air outlet leading to outside must always be installed on your unit. Make sure that the evacuated
air does not lead under a carport.
• If your unit includes two motors, it is important to use metal piping and couplings for the air outlet.
• To determine where to locate the wall inlets, use the length of the vacuum hose as a basis, measuring
the furthest point from the wall where the wall inlets are to be installed. Do the same for all the wall
inlets until all areas of the house or building can be reached with the vacuum hose, by moving it from
one wall inlet to another; don't forget to install one in the garage or outside to vacuum your car.
• If your walls are made of gypsum board, never install a wall inlet in the center of the wall. Drill the
holes for the wall inlets close to a wall stud or a door frame.
• Any screw length can be used if you install the piping as illustrated in Figure A.
• If you install the piping as illustrated in Figure B, make sure to position the small screw in the right place
to avoid that a longer screw goes through the piping.
• Always use a short elbow when connecting the wall inlets (Figures A and B) to prevent long objects (for
example, a pencil) that may have been vacuumed by mistake from blocking the piping further on.
Short elbow
Figure A
TITRE
TITRE
TITRE
Small Screw
Figure B
25