Drainvac COMPACT Series Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Centralne systemy próżniowe Drainvac COMPACT Series. Drainvac COMPACT Series 18 stron.

UNIT INSTALLATION

1) MOUNTING THE UNIT ON THE WALL

• Undo the fastener securing the wall bracket and base at the

back of the unit with cutting pliers.

• If the wall is covered with gypsum

board, we recommend installing a

wooden panel screwed to the wall studs

beforehand for more stability. Then,

screw the bracket to the wall with the

five (5) screws supplied with the unit.

• For a installation directly on a wall stud, screw three (3) screws in

the middle area only.

Cut the fastener

Gypsum

Board

Wooden

panel

Wall Stud

Suggested distance

from the floor:

50" (125 cm)

• Lift the head to slide its support onto the wall bracket.

2) CONNECTING THE

DUST INLET

Connect the dust inlet onto the unit

securing it with a collar (do not glue).

UNIT INSTALLATION