DRAKE DSE 2 PLUS Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Konwerter mediów DRAKE DSE 2 PLUS. DRAKE DSE 2 PLUS 20 stron. Dual hd digital signage encoder
Również dla DRAKE DSE 2 PLUS: Instrukcja obsługi (20 strony)
Drukuj stronę
1
RF Output: This type "F" connector is a high level (+29.5 dBmV to +45 dBmV), agile 5 to 1002 MHz, multiplexed
1
output from the DSE2 Plus RF output section.
DC Power Connector: This connector provides the means for connection to the 5 VDC output of the supplied external
2
power supply.
3
Component Input 2: These three color coded RCA connectors, Cr (red), Cb (blue), and Y (green), provide the means
to input component video. To input composite video, use the green 'Y' connector.
4
VGA Input 2: This VGA type connector provides the means to input VGA video from a computer or other device with
VGA output.
HDMI Input 2: This connector provides the means to input HDMI video (without HDCP) with optional embedded audio.
5
Audio Input 2: These two color coded RCA vtype connectors provide baseband audio Left (white) and Right (red)
6
inputs to the DSE2 Plus.
7
Closed Caption Input 2: This connector provides the means to input closed captioning. It requires analog composite
video that contains closed captioning.
VGA Loop Output 2: This connector provides VGA video output to a monitor or other equipment requiring VGA input.
8
It is only active when VGA is input on R4.
Component Input 1: These three color coded RCA connectors, Cr (red), Cb (blue), and Y (green), provide the means
9
to input component video. To input composite video, use the green 'Y' connector.
VGA Input 1: This VGA type connector provides the means to input VGA video from a computer or other device with
10
VGA output.
11
HDMI Input 1: This connector provides the means to input HDMI video (without HDCP) with optional embedded audio.
12
Audio Input 1: These two color coded RCA type connectors provide baseband audio Left (white) and Right (red)
inputs to the DSE2 Plus.
Closed Caption Input 1: This connector provides the means to input closed captioning. It requires analog composite
13
video that contains closed captioning.
VGA Loop Output 1: This connector provides VGA video output to a monitor or other equipment requiring VGA input.
14
It is only active when VGA is input on R10.
Status LED: Ethernet Link indicator.
15
16
IP Reset: When pushed and held for about 10 seconds, resets the IP address, Usernames, and Passwords to Factory
default values.
17
Ethernet Connection: This connector provides the means to connect the DSE2 Plus to an Ethernet local area
network or computer for remote control, monitoring, and/or firmware update. It is not recommended that this port be
connected directly to a wide-area network without external access controls, like a VPN or firewall.
Rear Panel Operation
6
7
8
2
3
4
12
13
14
5
9
10
11 15 16 17
937.746.4556 |
www.rldrake.com
9