Drake Systems DTH-3002R Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Alarm samochodowy Drake Systems DTH-3002R. Drake Systems DTH-3002R 10 stron.

Drukuj stronę
These functions can be activated or de-activated by remote controller.
All of these functions can be programmed when the key is located on "ACC" state
in the key box.
All of them are toggle functions and the default setting is "ON".
When these functions are activated, you can hear "BEEP_HI_LO" once.
When these are de-activated, you can hear "BEEP_HI_ LO" twice.
2-8.
CHIRP / NO CHIRP
When the button "LOCK" is pressed twice shortly (double click) during
the car key is in "ACC" position in the key box, the CHIRP sound
will be activated or de-activated with the green LED and "BEEP_HI_LO".
The siren in the mode of alarm and panic cannot be removed even though
the "CHIRP" is de-activated.
2-9.
ADJUSTMENT OF LOCK TIME
When the button " UNLOCK" is pressed twice shortly, this function can be changed.
The default is 3 seconds and the other is 0.8 seconds.
As this function is set properly at the time of installation, you need not use this
function.

2-10. IGNITION LOCK

When the button "ASTERISK" is pressed twice shortly, this function can be changed.
The car locks the door automatically during driving when it is activated,
but unlocks the door during driving when it is de-activated.
2-11. ON / OFF OF SENSOR
When you press the button "AUX" twice shortly, you can toggle this function.
When the sensor is activated, the car can be triggered by the sensor and alarms
the triggering of shock at the arm mode. But the car ignores the triggering
of sensor when de-activated.
2-12. PAGING FROM CAR
The paging from the car to the remote controller is unique feature
of the 2-way car alarm system.
The user can recognize the intruding into the car even though he/she is
far away from it.
When the car is in arm state and triggered by shock sensor or door open,
it alerts the status with light flashing and siren. And then,
it sends the signal to the remote controller to alert this status to the user.
Now the user can recognize the triggering by the remote controller shows
15 times of green, red LED and "CRICKET" sound. The siren and light can be