Bosch Axxis WFL 2090 Instrukcja obsługi, konserwacji i instalacji - Strona 31
Przeglądaj online lub pobierz pdf Instrukcja obsługi, konserwacji i instalacji dla Spryskiwacz Bosch Axxis WFL 2090. Bosch Axxis WFL 2090 36 stron. Axxis lavadora
Również dla Bosch Axxis WFL 2090: Instrukcja obsługi i konserwacji (37 strony), Instrukcja obsługi i instalacji (37 strony), Instrukcja obsługi, konserwacji i instalacji (36 strony), (Angielski) Instrukcja obsługi (37 strony)
Drukuj stronę
Hose and cable lengths
Water connection
Left-hand connection
[]
approx. 43"
(110cm)
approx. 35" (90 cm)
Right-hand
connection
approx. 59"
(150 cm)
[]
approx. 35" (90 cm)
Water supply
The washing machine must only be operated
with cold and hot (max. 140 °F / 60 °C) tap water.
Do not connect the appliance to the mixer tap of
an unpressurized
hot-water
boiler.
If in doubt, have the water connection
installed by
an authorized technician.
The water supply hoses must not be:
-
Bent or squashed.
-
Modified or cut (stability can no longer be guar-
anteed).
Plastic threads must only be tightened
by hand.
Do not remove the strainers from the water supply
hoses.
Observe the water pressure in the supply network:
The water pressure should be between 14.5 to
145 p.s.i. (1 to 10 bars) (when the tap is turned
on, at least 2.2 U. S. gallons (8 liters) of water
are discharged
per minute).
A pressure reducing valve must be installed if
the maximum water pressure is exceeded.
Other hoses
Available at specialty dealers:
-
Extended supply hose (approx. 2.2 m / 86.6 in).
To prevent against water damage, the hot and
cold water valves should be accessible when the
washer is in place and should always
be turned
off when the washer is not in use.
When the washer is being installed in a new
building, or a building in which the plumbing sys-
tem was installed or upgraded
recently, the lines
must be flushed prior to installing the washer.
This must be done to clear the lines of any sand,
dirt or residue that may still be in the lines.
31