Draper Paragon E Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ekran projekcyjny Draper Paragon E. Draper Paragon E 7 stron. Large, ceiling-recessed screen designed for auditoriums and lecture halls.

Drukuj stronę

Paragon E & V

Section 5 - Bottom Closure Removal/Replacement

Please Note: Removal and replacement of the bottom closure panel requires two people positioned about 5' from each end of the panel.

Closure should be handled as shown in Step 5 to prevent bowing of the closure during handling.

Step 1

CAUTION: Before

removing bottom

closure, you must first

remove screws at each

end of case

(see drawing)

Screw and

Washer

Step 3

Section 6 - Tab-Tension Adjustment Procedure

Please Note: Draper's Tab-Tensioning System is factory-set, and under normal

circumstances will not require field adjustment. If wrinkles are observed,

however, follow the adjustment procedure shown in Figure 4.

Step 2

Step 4

Figure 4

page 5 of 7

Step 5

CAUTION:

Be sure to replace

screws and washers

at each end of case

when replacing

closure!

(see drawing)

END OF

DOWEL

PUSH & TURN

COUNTER-CLOCKWISE

CLOCKWISE

to RELEASE TENSION

to INCREASE TENSION