Bosch WAE24461GB Instrukcja obsługi i instrukcja instalacji - Strona 23
Przeglądaj online lub pobierz pdf Instrukcja obsługi i instrukcja instalacji dla Spryskiwacz Bosch WAE24461GB. Bosch WAE24461GB 40 stron. Bosch wae24461gb washing machine
Również dla Bosch WAE24461GB: Instrukcja obsługi i instrukcja instalacji (40 strony)
2
Cleaning and
maintenance
n g
C l e a n i
:
Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Switch off the appliance and unplug the
mains plug.
:
Warning
Risk of poisoning!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
Damage to the appliance
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
machine.
Do not use cleaning agents that contain
solvents.
Machine housing/control
panel
Wipe the housing and the control
■
panel with a soft, damp cloth.
Do not use any abrasive cloths,
■
scourers or cleaning agents
(stainless steel cleaners).
Remove the detergent residue
■
immediately.
Cleaning with a jet of water is
■
prohibited.
Drum
Wipe the inside of the rubber seal dry
with a cloth. Leave the washing machine
door open in order that the drum can
dry. Use chlorine-free cleaning agents
and not steel wool.
a n d
Cleaning and maintenance
Descaling
Make sure that there is no
Note:
laundry in the machine.
e n a n c e
m a i n t
Descaling should not be necessary if
the detergent is measured out correctly.
However, if it is required, follow the
manufacturer's instructions for the
descaling agent. Suitable descalers can
be obtained via our website or from our
after-sales service.
Detergent drawer and housing
If the washing machine contains
detergent or fabric softener residues:
Pull out the detergent drawer. Press
1.
down the insert and fully remove the
drawer from the housing.
To remove the insert, push the insert
2.
up from below with your finger.
Clean the detergent dispenser tray
3.
and insert with water and a brush,
and dry it. Also remove any
detergent or fabric softener residues
in the housing.
Fit the insert and lock it in place
4.
(push the cylinder onto the guide
pin).
Push in the detergent drawer.
5.
Leave the detergent drawer open
Note:
so that any residual water can
evaporate.
en
23