Bosch WAE28377GB Series Instrukcja obsługi i instrukcja instalacji - Strona 30
Przeglądaj online lub pobierz pdf Instrukcja obsługi i instrukcja instalacji dla Spryskiwacz Bosch WAE28377GB Series. Bosch WAE28377GB Series 36 stron.
Drukuj stronę
Positioning and connecting
en
Caution!
Water damage
The connection points for the water
supply hose and water drain hose are
under high water pressure. To prevent
leaks and water damage, you must
follow the instructions in this section.
Notes
In addition to the safety information
■
listed here, the local water and
electricity supplier may have special
requirements.
If in doubt, have the appliance
■
connected by a specialist.
Installation surface
The washing machine must be
Note:
stable so that it does not move around.
The surface on which it is installed
■
must be firm and level.
Soft floors/floor coverings are not
■
suitable.
Installation on a base or a
wooden joist floor
Caution!
Damage to the appliance
The washing machine may "wander"
and tip/topple from the base when
spinning.
Use holding brackets to secure the feet
of the appliance.
Order no. WMZ2200, WX975600,
Z7080X0
On wooden joist floors, install the
Note:
washing machine:
In a corner, if possible,
■
On a water-resistant wooden board
■
(min. 30 mm thick) which is screwed
tightly to the floor.
30
Installing the appliance in a
kitchenette
:
Warning
Install the appliance (underneath the
worktop or fitted in a cabinet) before
connecting it to the power supply.
Notes
Recess width of 60 cm required.
■
Only install the washing machine
■
underneath a continuous worktop
that is securely connected to
adjacent cabinets.
:
Warning
Risk of electric shock!
Instead of the appliance covering plate,
you must have a metal cover* fitted by
an expert.
* Order no. WMZ2420, WZ10190
Removing the transport locks
Caution!
Damage to the appliance
The machine is secured for
■
transportation using transport locks.
If the transport locks are not
removed, the drum, for example,
may become damaged when the
machine is operated.
Before using the appliance for the
first time, make sure that you
completely remove all four transport
locks. Keep the locks in a safe
place.
To prevent transport damage from
■
occurring if the appliance is moved
at a later date, you must refit the
transport locks before transporting
the appliance.
Store the screw and sleeve
Note:
screwed together.