Draper 15225 Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Elektronarzędzie Draper 15225. Draper 15225 16 stron. 2000w 230v hot air gun
Również dla Draper 15225: Instrukcja obsługi (16 strony)

Drukuj stronę

INTRODUCTION

MAINTENANCE AND TROUBLESHOOTING

9.1 MAINTENANCE

4.1 SCOPE

Regular inspection and cleaning reduces the necessity for maintenance operations and will keep your

As part of our core range, this product is suitable for enthusiasts and tradespeople alike.

tool in good working condition.

Any application other than that it was intended for, is considered misuse.

The motor must be correctly ventilated during tool operation. Avoid blocking the air inlets and vacuum

4.2 SPECIFICATION

the ventilation slots regularly.

Stock No. .......................................................................................................................................15225

9.2 TROUBLESHOOTING

Part No. ...................................................................................................................................HG2000D

Rated voltage ..................................................................................................................... 230V~50Hz

Problem

Rated input ................................................................................................................................ 2000W

Motor does not start.

Temperature (approx.)

Setting 1 ...................................................................................................................................50°C

Setting 2 .................................................................................................................................450°C

Setting 3 .................................................................................................................................600°C

Air flow volume

Setting 1 ............................................................................................................................500L/min

Setting 2 ............................................................................................................................250L/min

Setting 3 ............................................................................................................................500L/min

Weight (machine only):................................................................................................................ 0.85kg

4.3 HANDLING & STORAGE

– Care must be taken when handling this product.

● Dropping this power tool could have an effect on its accuracy and could also result in

personal injury. This product is not a toy and must be respected.

– Environmental conditions can have a detrimental effect on this product if neglected.

● Exposure to damp air can gradually corrode components.

● If the product is unprotected from dust and debris, components will become clogged.

● If not cleaned and maintained correctly or regularly, the machine will not perform at its best.

IMPORTANT: Please note this machine is fitted with a safety thermal overload protection. If the

product is used continuously too close to the work piece (i.e. misused) resulting in over heating

and the machine potentially catching fire, the thermal overload protection will be activated and

stop the heating element from operating within the machine. This will cause the gun to blow cool

air until the inner components of the heat gun have cooled sufficiently. This process takes

10. OPTIONAL ACCESSORIES

approximately 2 minutes. Repeat overloading will lead to permanent damage.

Remember the nozzle will remain hot for sometime - a safe storage location should be

10.1 OPTIONAL ACCESSORIES

used.

Store in a dry location out of the reach of children.

A full range of accessories are available from Draper Tools.

Please visit our website for details: www.drapertools.com

Possible Cause

1. Blown fuse in plug.

2. Unknown.

- 13 -

- 5 -

Remedy

1. Replace fuse.

2. Return to service centre.