Draper DRILL PRESS Instrukcja obsługi - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Draper DRILL PRESS. Draper DRILL PRESS 20 stron.

1. The table ✰✌ (Fig. 17) can be raised or

lowered on the drill press column by

loosening the table clamp handle ✱✌ and

turning the table raising and lowering handle

✲✌. After the table is at the desired height,

tighten handle ✱✌.

2. Loosening the locking bolts ✳✌ Fig. 18)

and rotating the table on the pivot ✴✌,

retighten ✳✌.

3. A tilt scale ✵✌ (Fig. 19) is provided on the

table bracket casting to indicate the degree

of tilt. A cursor line ✶✌ is also provided on

the table to line up with the scale.

OPERATION AND USE

✱✌

Fig.18.

Fig.19.

- 13 -

✲✌

✰✌

✳✌

✴✌

✵✌

✶✌

Fig.17.