Draper GD13/5C Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Draper GD13/5C. Draper GD13/5C 20 stron.
Drukuj stronę
- 1. Drill Press
- 2. General Information
- 3. Table of Contents
- 4. Contents/Declaration
- 5. Specification/Guarantee
- 6. Power Supply
- 7. General Safety Instructions
- 8. Additional Safety Rules
- 9. Unpacking and Checking
- 10. Getting to Know Your Drill Press
- 11. Assembly
- 12. Operation and Use
- 13. Operation and Use
- 14. Trouble Shooting
- 15. Optional Accessories
4. Ease table bracket and rack all the way down
onto the column. Replace collar ✳✌ and re-
tighten the grub screw, locking rack ✴✌ into
place.
5. Slide table ✵✌ onto the table bracket as
shown in Fig.6 and lock into place using the
table locking nuts and washers ✶✌.
6. Fix table raising handle ✷✌ and bracket
locking handle ✸✌ as shown in Fig 6.
7.Place the drill press head ✹✌ onto column as
far as it will go (seek assistance as it is very
heavy). Align the head and table to drill press
base and tighten the two head locking screws
✺✌ as shown in Fig 7.
ASSEMBLY
Fig.5.
✳✌
Fig.6.
✸✌
Fig.7.
- 9 -
✴✌
✷✌
✵✌
✶✌
✹✌
✺✌