Draper HG2000 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Draper HG2000. Draper HG2000 12 stron. 2000w hot air gun

SPECIFICATION

The Draper Tools policy of continuous improvement determines the right to change specification

without notice.

Part No.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HG2000

Stock No. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64261

Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000W

Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60/590°C

Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V/50Hz

Air flow volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300/500 L/min

Weight (machine only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750g.

IMPORTANT:

Please note this machine is fitted with safety thermal overload protection. If the product, for

example, is used too close to the workpiece - resulting in overheating, the thermal overload

protection will be activated and stop the motor/heating of the machine.

The hot air gun should be switched off and disconnected from the power supply, allowing the

machine to totally cool down - before restarting work.

Remember the nozzle will remain hot for sometime - a safe storage location should be used.

GUARANTEE -

DOMESTIC DIY POWER TOOLS

Draper tools have been carefully tested and inspected before shipment and are guaranteed to be

free from defective materials and workmanship.

Should the tool develop any fault, please return the complete tool to your nearest distributor

or contact Draper Tools Limited, Hursley Road, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF.

England. Telephone: (023) 8026 6355.

If upon inspection it is found that the fault occurring is due to defective materials or workmanship,

repairs will be carried out free of charge. The guarantee period covering parts/labours 12 months

from the date of purchase. The guarantee is extended to 24 months for parts only. This guarantee

does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless

or unsafe handling, alterations, accident, or repairs attempted or made by any personnel other

than the authorised Draper warranty repair agent.

This guarantee applies in lieu of any other guarantee expressed or implied and variations of its

terms are not authorised.

Your Draper guarantee is not effective unless you can produce upon request a dated receipt or

invoice to verify your proof of purchase within the guarantee period .

Please note that this guarantee is an additional benefit and does not affect your statutory rights.

Draper Tools Limited.

Note: This tool is intended for domestic use only.

- 2 -