Draper 63121 Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wiertarka Draper 63121. Draper 63121 12 stron. Cordless hammer drills

✳✌

✪✌ TRIGGER - When the variable speed switch trigger is depressed the chuck will

rotate (providing the direction switch is in a clockwise or anticlockwise position).

✫✌ FORWARD/REVERSE LEVER - This lever determines the direction of rotation of

the chuck, i.e. clockwise or anticlockwise.

✬✌ KEYLESS CHUCK - This is for holding tools, i.e. drill bits or screwdriver bits.

✭✌ RATING PLATE - Shows Part No., voltage, capacity, etc.

✮✌ TWO-SPEED GEARBOX SELECTOR SWITCH - This adjusts the rotation speed

range of the chuck via the two-speed gearbox. (NOTE: Only change gear when the

drill has completely stopped).

✯✌ BATTERY RELEASE - To release the battery pack, squeeze the grips located on

either side of the battery casing and carefully slide it out.

✰✌ BATTERY PACK - This is the drill's power supply.

✱✌ TORQUE CONTROL - There are 11 torque settings, settings 1-10 are normally used

for hammer action. The eleventh setting is for standard drilling.

✲✌

BATTERY CHARGER - Charges the battery in approximately 1 hour.

✳✌ CHARGING INDICATOR - This will glow when the battery is charging.

✴✌ HAMMER SETTING - Select this setting for hammer drilling into

brickwork/masonry.

GETTING TO KNOW YOUR

CORDLESS DRILL/CHARGER

✬✌

✲✌

✴✌

✱✌

✫✌

✪✌

- 7 -

✮✌

✭✌

✯✌

✰✌

FIG.B