Draper CHD182VLIA Instrukcja obsługi - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wiertarka Draper CHD182VLIA. Draper CHD182VLIA 20 stron. 18v cordless combi-drill

BASIC OPERATION

9.1 TRIGGER - FIG. 4

When the trigger is depressed, the chuck will rotate

(provided the direction switch is set in the forward or the

reverse position). This trigger switch is electronic which

enables the user to vary the speed continuously. The

speed varies according to how far the trigger switch is

depressed. The further it is depressed, the faster the

chuck will rotate. The lighter it is depressed, the slower it

will rotate.

9.2 TORQUE CONTROL - FIG. 5

By turning the collar

amount of torque.

Settings 1-16 provide a facility for setting the torque to

the required level. For example, this means that repetitive

driving of screws of the same size will be driven into the

material to the same torque, thus giving the same fixing

strength, or in the case of countersunk screws, these will

all be driven to the same depth in the material.

The torque control prevents the heads of small diameter

screws being twisted off when correctly set.

By turning the collar

rotary and percussion drilling.

In the "twist drill" setting

full torque. In the "Hammer Drill" setting

hammer feature will come into action.

This is mostly used for drilling into masonry, etc.

9.3 SPEED SELECTION SWITCH - FIG. 6

To change the speed of the chuck, slide the two speed

gearbox selection switch

backwards for high speed.

IMPORTANT: Never change speed with the chuck in

motion.

9.4 LED WORKLIGHT - FIG. 7

To aid use in confined, and inadequately lit spaces; the

LED worklight automatically illuminates when the trigger

is activated.

it is possible to adjust the

it is possible to switch between

, the drill/screwdriver has

, forwards for low speed, or

FIG. 3

FIG.5

, the

FIG.7

FIG.6