Draper 74603 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Piła Draper 74603. Draper 74603 12 stron. Metal cutting saw 185 mm

NOTE:

Remove the plug from the socket before

carrying out adjustment, servicing or

maintenance.

AUXILIARY SIDE HANDLE (Fig.1.):

Screw the auxiliary side handle (A) into the

threaded hole on the front metal housing.

BLADE FITTING AND REMOVAL

(Figs.2-4):

Remove the swarf collection box (B) by

turning handle (C) anticlockwise.

NOTE:

When removing/refitting, notice the top of

the swarf collection box slides under the

plastic housing.

To take out the inner blade cover remove the

three securing screws (D).

Raise the saw up to full height, see page 8, to

enable the inner blade guard to be dropped

down and then out.

Press down spindle lock (E) and loosen

spindle bolt (F) with spanner supplied.

NOTE:

The spindle bolt has a right hand thread: anti-

clockwise to remove.

Take note of the direction and order the

bolts, washer and flanges are removed, to

ensure correct assembly.

Fit the new blade, ensuring the tip of the

teeth are facing upwards at the front of the

saw, and observe the direction of rotation

arrows on the blade/machine match.

ASSEMBLY

Fig.1.

Fig.2.

Fig.3.

(F)

Fig.4.

- 6 -

(A)

(C)

(B)

(D)

(E)