Draper MBS46A Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Piła Draper MBS46A. Draper MBS46A 16 stron. Horizontal and vertical metal cutting bandsaw

8. BLADE GUIDE ADJUSTMENT

It is impossible to get satisfactory

work from the saw if the blade

guides are not properly adjusted.

The gap between the blade and the

guide should be .00.1" clearance,

anything larger will allow the blade

to flex. Both upper and lower

guides are adjusted in the same

way and both the inner guides are

fixed. The outer guides are in

eccentric bushes. Loosen nut ✸✌,

adjust the bearing on the front nut

✹✌. When correctly set retighten

the rear nut ✸✌. To set the blade

square with the bed, use an

engineers square (Draper Stock

No.34065) as shown in (Fig.9). To

alter the blade loosen bolt ✺✌

(Fig.10) which when loose allows

movement in the guides. When set

resecure the bolt. To allow for

different size pieces of material the

guides are adjustable. Loosening

knob ✻✌ (Fig. 11) allows the upper

guide to slide. When set retighten.

Should the lower guide require

adjustment, loosen screw ✼✌ to

move the lower guide into position,

when set secure.

OPERATION & USE

FIG.9.

✺✌

FIG.10.

✻✌

✼✌

FIG.11.

- 5-

- 9 -

✸✌

✹✌