Draper 56490 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sander Draper 56490. Draper 56490 20 stron. 230v mini belt sander

ASSEMBLY

8.1 FITTING THE SANDING HEAD –

FIGS.1 – 4

Warning! Disconnect the machine from the power

supply before carrying out any adjustment,

servicing or maintenance:

– Place the belt tracking adjustment spring

into the locating recess at the front of the

sanding arm

– The sanding head

arm

one way only. Align the slot in the side

of the sanding head with the corresponding

ridge located on the sanding arm. Ensure that

the free end of the spring fits over the raised lug

on the sanding head.

– Apply light pressure to compress the spring,

keeping the sanding head engaged with the

sanding arm.

– Fit the belt tracking adjustment knob

the screw hole located inside the oval shaped

aperture on the (motor) side of the sanding

arm.

– Tighten the screw, gradually drawing the

sanding head into the body of the sanding arm.

fits onto the sanding

FIG.1

into

FIG.2

FIG.3

FIG.4

- 11 -