Draper 56490 Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sander Draper 56490. Draper 56490 20 stron. 230v mini belt sander
4.
INTRODUCTION
4.1 SCOPE
A narrow belt sander designed to access "hard to reach" areas where a traditional sander could
not access.
As part of our core range, this product is suitable for enthusiasts and tradespeople alike. Any
application other than that it was intended for, is considered misuse.
4.2 SPECIFICATION
Stock No. .................................................................................................................................. 56490
Part No. ............................................................................................................................. BS400D13
Motor:
Rated voltage ................................................................................................................ 230V~
Rated frequency .............................................................................................................. 50Hz
Rated input .................................................................................................................... 400W
Belt speed (no load) ..................................................................................... 300 – 1700M/min
Belt width ................................................................................................................................. 13mm
Belt length ............................................................................................................................. 457mm
Sound pressure level (LpA)*: ........................................................................................... 80.2dB(A)
Sound power level (LWA)**: .............................................................................................. 91.2dB(A)
Vibration level
†
:................................................................................................ 1.215m/s², K=1.5m/s2
Weight (machine only)................................................................................................................. 2kg
*
Continuous A-Weighted Sound Pressure Level at the workstation in accordance to and declared
according to EN60745.
** The typical A-weighted noise level determined according to EN60745.
† When sanding in wood.
4.3 HANDLING AND STORAGE
– Care must be taken when handling this product.
● Dropping this power tool could have an effect on its accuracy and could also result in
personal injury. This product is not a toy and must be respected.
– Environmental conditions can have a detrimental effect on this product if neglected.
● Exposure to damp air can gradually corrode components.
● If the product is unprotected from dust and debris, components will become clogged.
● If not cleaned and maintained correctly or regularly, the machine will not perform at its best.
- 5 -