Draper 65084 Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sander Draper 65084. Draper 65084 16 stron. Dual action air composite sander
Również dla Draper 65084: Oryginalna instrukcja obsługi (20 strony)

Drukuj stronę

INTRODUCTION

4.1 SCOPE

Composite bodied air sander with hook and loop backing pad, suitable for 150mm/6"Ø abrasive

sheets.

4.2 SPECIFICATION

Stock No. ................................................................................................................................. 65084

Part No. ........................................................................................................................ DAT-APS-SF

Backing pad diameter ...................................................................................................... 150mm/6"Ø

Revolutions per minute (no load) ..................................................................................... 10,500r/min

Max. operating air pressure ......................................................................................... 90psi (6.3bar)

Average air consumption ......................................................................................... 3.0cfm (85L/min)

Minimum air line size .................................................................................................................3⁄8"ID

Air inlet ....................................................................................................................................¼" BSP

Sound pressure level (LpA) ................................................................................................... 85dB(A)

Sound power level (LWA) ..................................................................................................... .96dB(A)

Vibration level ......................................................................................................................... 6.3m/s²

Weight ....................................................................................................................................0.88kgs

4.3

HANDLING AND STORAGE

− Care must be taken when handling this product.

• Dropping this power tool could have an effect on its accuracy and could also result in

personal injury. This product is not a toy and must be respected.

− Environmental conditions can have a detrimental effect on this product if neglected.

• Exposure to damp air can gradually corrode components. If the product is unprotected from

dust and debris, components will become clogged.

• If not cleaned and maintained correctly or regularly, the machine will not perform at its best.

– 5 –