Draper RS230KA Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sander Draper RS230KA. Draper RS230KA 16 stron. 230w random orbital palm sander

PREPARING THE SANDER

WARNING: Contact with or inhalation of harmful toxic

FIG.1

dusts arising from sanding lead paint surfaces, woods,

etc., can endanger the health of operators and

bystanders. An approved dust mask shall be worn.

Prior to connecting this machine to the power supply

ensure the switch is in the "off" position.

8.1 SWITCH - FIG. 1

Ensure the sander is raised off the workpiece. To

activate the sander, position the rocker switch

to the

"I" position. The sander will continue to run until

is changed back to the "O" position.

This machine is intended for fine detail/light duty

sanding of wood and similar materials only.

Apply equal pressure on the workpiece with the backing

pad remaining flat. Attempting to sand areas using only

the edge will lead to damage to the backing pad.

NOTE: Excess pressure when sanding reduces the

effectiveness of tool and will cause the motor to

overload.

Do not overload this machine.

Replace abrasive discs when clogged with material or

when surface/edge has rips, cracks or worn areas.

Inhalation of dust particles can be detrimental to

health. The dust outlet must be connected with a dust

extraction machine.

NOTE: Due to the outlet diameter, a size adaptation

may be necessary.

All wood dust (including dust from composites like

chipboards and fibre boards etc) is hazardous to health:

it can affect the nose, the respiratory system and the

skin. For example MDF (medium density fibreboard)

which contains formaldehyde is a known carcinogen. In

addition to the above measures a correctly fitted dust

mask, suitable for the activity and in accordance to the

relevant standard, must be worn.

For work activities involving exposure to fine wood dust

a mask rated to at least FFP2 should be used.