Drawell TD30002 Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wagi Drawell TD30002. Drawell TD30002 6 stron. Precision balance

the weight of the individual sample should not be less than the division of the

balance.

Return to Weighing Mode: Press key PCS to return to Weighing mode.

OVERLOAD

The weight of the objective cannot exceed the rated maximum capacity of the

balance, when exceeding, "-------" will be shown in the display, remove the

objective immediately from the platter so as to prevent damages to the

balance.

TIPS

 Warming up is necessary before any operation to the balance.

 In TARE mode, the value of the tare cannot exceed the maximum capacity

of the balance

 Calibration is necessary to ensure a reliable weighing.

 Switch off the balance when it is not used.

 It is suggested to turn the round platter clockwisely before take it off the balance

Maintenance ----- Trouble shooting and solutions

Phenomenon

Upper Line - - - -

Under Line_ _ _ _

Err-1

Err-2

Possible Reason

Over Load

The object is not properly loaded to

the balance

Too frequently turn on and off the

balance

The balance is not stablised

Solution

Re-calibrate the Balance

Turn off the balance, resume it after 3

seconds

Wait for a few seconds for stabilization