Drawell TDD Series Podręcznik użytkownika - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wagi Drawell TDD Series. Drawell TDD Series 8 stron. Precision balance
Drukuj stronęFeatures,
High Precision loadcell
Aluminum Alloy die cast base and mains
Stainless Steel Platter
Super Bright LED/LCD display with backlight
Glass windshield supplied as standard
Height adjustable feet
RS232 Interface supplied as standard
Full Capacity subtraction
Below Balance hanger supplied as standard
Stabilization time 1-1.5 seconds typically
Overload Protection
Selectable measure units, g, ct,oz, lb, ozt
Checking Weighing, Piece counting function
Function Keys
ON/OFF
, to turn on / off the balance
PCS
, for counting
TARE
, to tare
UNIT
, for unit conversion (g/ct/oz/lb/ozt)
CAL
, for calibration
MENU,
for print
ASSEMBLING
Unpack the package, put the platter on the top of the loader.
Put the balance on a steady flat surface away from vibration, direct
sunshine ,air blow or strong magnetic disturbance..
TURN ON THE BALANCE
Connect the balance to power supply, keep the switch in the ON(-) position.
Press key ON/OFF to turn on the balance, the balance will in turns display
following figures,
8.8.8.8.8.8.
Maximum capacity
------------
Finally the balance stays in a standby state of showing 0.000g in the display
Notice: the lasting time of --------- will be decided by the stability of the loadcell,
thus, the balance must not be located in an unstable surface or in the wind
blow. When the indicator O flashes in the display, it means the environment is
not good for the following operations.