Drawell DW-2002H Instrukcja serwisowa - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Mikroskop Drawell DW-2002H. Drawell DW-2002H 11 stron. Epi-fluorescent microscope

Dear Sir or Madam:

Thank you for using Epi-fluorescent microscopes. As one of the professional designers,

manufacturers and distributors for optical instruments in China, since 1978, we have been working

for supplying the new or old customers worldwide with high-quality and low-cost products. We

wish that our products could bring you success and satisfaction. We enjoy offering you the most

suitable products and the best service.

This manual gives a minute description of the structure, principle, configuration operating

guide, troubleshooting, maintenance and some attention for Epi-fluorescent microscopes. Please

read it carefully before you use, and keep it for long time.

In particular, the following notes must be understood thoroughly and obeyed strictly:

1. Permitted use:

Being high-precision laboratory apparatus, it is combined perfectly by an

Epi-fluorescence device and an ordinary microscope. It is not only used for fluorescent

microscopy observation, but also used for general biological microscopy observation.

2. No dismantle the equipment:

Unless you are a microscopic expert, or there is a special guide about doing so in the

manual, please don't dismantle your microscope. Otherwise, it will damage the microscope

seriously, and reduce greatly its accuracy and using-life. When you identify some troubles,

and can't troubleshoot them by yourself according the manual, please contact us or our

representative in you area.

3. Safety:

----The lamp-house of the Epi-fluorescence device and the base near the illuminator will

be very hot to burn your fingers. Don't worry about it, but it must be treated carefully.

Please take care of yourself and take the combustible material (such as gasoline, paper,

plastic and cloth) far away from the microscope.

----Before change the mercury lamp in lamp-house or the halogen lamp in base, ensure

that it has been disconnected with the power source. The new bulb must be the same

specifications as the old one. At same time, ensure the lamp cool enough; otherwise the hot

Attention