Drawmer M-Clock Plus DMS-5 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Konwerter mediów Drawmer M-Clock Plus DMS-5. Drawmer M-Clock Plus DMS-5 10 stron. Aes grade 1 master clock and dual sample rate converter

Drukuj stronę

MODE

FREQ

±PPM

±%

MASTER CLOCK GENERATOR

SAMPLE RATE

EXT SOURCE

With the sample rate set to EXT a switch controls the mode of display enabling you to read

the incoming sample rate in your preferred manner. Pressing the switch toggles through the

three modes of FREQ, ±PPM and ±%, with led indication.

The outgoing sample rate for all outputs of the DMS-5 can be set using the two sample rate

switches - the left moving down rate and the right moving up, with a corresponding LED being lit to

show the current sample rate. The DSM-5 generates six Ultra Low Jitter sample rates - 44.1k, 48k,

88.2k, 96k, 176.4k and 192k, all stable to <1ppm, and in addition can also operate at the sample

rate generated by an external source.

With the Sample Rate set to EXT the EXT SOURCE switch

toggles between either AES or Wordclock (as located on the

rear panel). As with the "Source" section a lock LED is

provided on the front and operates when the EXT clock signal

is strong.

Displays the actual frequency to four decimal places

upto 192kHz.

Displays the nominal sample rate with +/- ppm (part

per million) error indication for 32, 44.1, 48, 88.2, 96 &

192KHz.

Displays the nominal sample rate with percentage pull

up/down indication for 32, 44.1, 48, 88.2, 88.2, 96 &

192KHz