BD Diesel Performance 1037135 Instrukcja instalacji - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe BD Diesel Performance 1037135. BD Diesel Performance 1037135 18 stron.
Drukuj stronę
8 February 2021
BD Universal Remote Mount Vacuum Brake
8
Run the pink, green and blue wires through a grommet on the firewall making sure all
wires are secure and away from moving objects and heat sources. Go to page 11 and
follow the instructions to calibrate the DFIV module.
Cruise Control Disable Wiring
Locate the factory black w/yellow tracer wire at the cruise control disable (Brake
Applied) switch located on the brake master cylinder and expose the wiring
approximately 4-6 inches from the switch to allow for a good length to work with. This
wire may be a different color in various applications. If there is no black w/yellow wire
going to this switch, then use a test light to check which wire changes state (power to
no power) when the brake pedal is applied.
Cut the black w/yellow tracer wire (BK/Y), then strip both ends and attach a separate
blue Posi-Lock connector on each end of the cut wire. Run the green and blue wires
that were brought through the firewall to the Brake Applied Switch at the brake booster
and cut off any excess. Attach these wires to the two blue Posi-Lock connectors that
you have just installed to the Black wire w/Yellow tracer.
BD Engine Brake Inc.
1-800-887-5030 | https://www.bddiesel.com